Skip to main content
Master concrete craftsman hand-tooling a stamped slate patio beside a Chattanooga home
Licensed, bonded & insured, TN #00684219

Chattanooga's Master Concrete Craftsman, On-Site for Every Pour

Artistic, durable stamped, stained, and structural concrete, one project at a time.

17 years, 450+ projects, licensed, bonded & insured. Arthur Vance hand-tools every detail himself, from the first layout line to the final coat of sealer.

Projects run $4 to $22 per sq. ft. depending on the finish. You get one firm, itemized quote before anything starts.

  • 5.0 (40+ Google reviews)
  • Licensed, Bonded & Insured
  • 450+ projects completed
  • 17+ years, owner on every pour
Sound familiar?

The four things homeowners tell us before we start

Most of the concrete we replace did not fail because of the concrete. It failed because of what happened before the truck arrived.

A driveway that has given up

Cracked, spalling, settling at the joints. Most Chattanooga driveways that fail were poured thin over bare clay with no steel in them.

What we do We dig out the failed base, compact crushed stone, and set a #4 rebar grid before a single yard goes down.

Crews that pour and disappear

High-volume outfits book three jobs a week. Prep gets rushed, the stamping window gets missed, and nobody is there when the finish matters.

What we do Arthur takes one project at a time and is on-site for the whole pour, cure, and seal.

Pavers that never stop needing work

Weeds in every joint, settling where the base washed out, and re-leveling every few seasons. The look costs you every year you own it.

What we do Stamped concrete gives you the same stone look as one reinforced slab with far less upkeep.

Not knowing what survives a Tennessee winter

Freeze-thaw cycles and de-icing salt destroy unsealed and under-reinforced concrete. Most homeowners get no real guidance on it.

What we do We spec mix, joints, and sealer for freeze-thaw durability, then keep you on a reseal cycle.

Arthur Vance hand-tooling the edge of a freshly stamped concrete slab Tied rebar grid on chairs over a compacted crushed-stone base before a driveway pour
Founder's commitment

"I left commercial crews because I missed working with the people who actually live on the property. Concrete is a canvas. If I am not there for the pour, it is not my work."

Arthur Vance

Founder & Master Concrete Craftsman

Why homeowners choose Arthur

One craftsman, 450+ projects, no shortcuts

Vances Concrete Craft has been an independent, owner-operated business in Hamilton County since 2007. That structure is deliberate, and it is why the work holds up.

The craftsman who quotes it is the one who pours it

Arthur Vance founded this business in 2007 specifically so he could stay on the tools. He walks your property, lays out the design, sets the forms, works the stamp, and applies the sealer. There is no crew chief, no rotating subcontractor, and nobody learning on your slab.

Thick-gauge steel reinforcement, not wire on dirt

Every structural pour gets #4 or #5 rebar tied on chairs over a compacted crushed-stone base, plus a 4,000 PSI mix and saw-cut control joints. That combination is the difference between a slab that lasts decades and one that cracks into pieces in five winters.

Artistic finishes, custom-blended on site

Ashlar slate, cobblestone, European fan, and wood plank patterns with integral color and hand-applied antiquing releases. Acid-stained concrete floors get layered, translucent color that no two slabs ever repeat.

Built for freeze-thaw durability

Chattanooga winters cycle above and below freezing repeatedly. We seal with freeze-thaw-rated acrylics or penetrating silane-siloxane, keep joints tight, and tell you honestly when a surface is due for its next coat.

A licensed concrete contractor you can verify

Tennessee Contractor License #00684219, fully bonded and insured. Seventeen years of independent operation and more than 450 completed residential projects across Hamilton County, all of them Arthur's own work.

A firm number before anything starts

Your free in-person design consultation ends with an itemized quote covering prep, reinforcement, finish, and sealing. If something on site changes the scope, you hear it before it costs you anything.

More about Arthur
The process

How a project runs, start to finish

  1. 01

    Design consultation

    Arthur comes out, measures, checks drainage and subgrade, and talks through patterns, colors, and what your property actually needs. Free, in person, no pressure.

  2. 02

    Firm itemized quote

    You get one number covering demolition, base prep, reinforcement, the pour, the finish, and sealing. We book your date, usually four to eight weeks out.

  3. 03

    Prep and pour

    Excavation to competent ground, compacted stone base, steel set on chairs, forms squared and staked. Then the pour, worked and hand-tooled by Arthur himself.

  4. 04

    Cure, seal, walk it together

    The slab cures under a controlled schedule, gets its sealer at the right moment, and Arthur walks the finished work with you before he calls it done.

Not sure whether to repair or replace?

Arthur will look at your slab in person and tell you straight. No obligation, no pressure.

What you're actually paying for

One craftsman on every pour, not a rotating crew

Most of the difference between a slab that lasts and one that doesn't happens before the truck ever shows up.

Vances Concrete Craft
Typical high-volume crew
Who shows up
Arthur, personally, start to finish
Whichever subcontractor is free that day
Reinforcement
#4/#5 rebar tied on chairs over compacted stone
Wire mesh laid straight on bare dirt
Projects running at once
One, so nothing gets rushed
Three or more a week
Your quote
One firm, itemized number before work starts
A ballpark that grows once the crew arrives
Track record
17 years, 450+ projects, same craftsman every time
Turnover you never see

If something on site changes the scope, you hear about it before it costs you, not after.

Free tool

Concrete Project Cost Estimator

Get an instant price range for your stamped, stained, or structural concrete project based on our published Chattanooga rates.

Get an Instant Estimate
Client endorsements

What Chattanooga homeowners say

5.0 from 40+ reviews

"Arthur transformed our cracked asphalt driveway into a gorgeous slate-stamped concrete masterpiece. He was on-site every single day himself, perfecting the texture."

SM
Sarah M.Signal Mountain, TN

"Incredible attention to detail on our stained concrete basement floor and patio. Arthur is a true craftsman who doesn't cut corners on prep work."

DL
David L.Lookout Mountain, TN

"A true professional. Arthur completed our decorative pool deck on schedule and exactly on budget. His 17 years of experience really show."

G&
Greg & Tammy K.Ooltewah, TN
17+
Years independent
450+
Residential projects
5.0
Star Google rating
1
Project at a time

Every number here belongs to one craftsman. Arthur Vance has poured, tooled, and sealed each of those projects himself since 2007, working under Tennessee Contractor License #00684219.

Service coverage

Serving Chattanooga & Hamilton County

From steep-slope driveways on Signal and Lookout Mountain to waterfront pool decks near Ooltewah, we work across the whole county out of our shop on Dallas Rd.

Primary areas

Also serving

View all service areas
Based at 1402 Dallas Rd, Chattanooga
Got questions?

Concrete Contractor FAQs for Chattanooga Homeowners

What areas around Chattanooga do you serve?
Vances Concrete Craft serves Chattanooga, North Shore, Red Bank, Signal Mountain, Lookout Mountain, Hixson, East Brainerd, and Ooltewah. We regularly handle steep-slope driveways on Signal and Lookout Mountain and waterfront pool decks near Ooltewah.
Will Arthur personally work on my project?
Yes. Arthur Vance is a solo master craftsman who is on-site for every pour and personally hand-tools, cures, and seals each project. The craftsman who designs your layout is the same one who finishes it — one project at a time.
How far in advance should I book?
Because Arthur manages every project start to finish, booking in advance is recommended. Typical lead times range from 4 to 8 weeks, so reserve your project date early — especially for spring and summer patio and pool-deck work.
Are you licensed, bonded, and insured?
Yes. Vances Concrete Craft is fully licensed, bonded, and insured under Tennessee Contractor License #00684219, with 17 years of independent operation and 450+ completed residential projects.
How much does decorative concrete cost per square foot?
Pricing depends on the finish: stamped & decorative concrete runs $12-$22/sq. ft., custom driveways & walkways $8-$14/sq. ft., acid-stained & dyed concrete $6-$11/sq. ft., and restoration & sealing $4-$8/sq. ft. Every project starts with a free in-person design consultation and firm quote.
How do you prevent cracking and winter damage?
We use thick-gauge steel reinforcement, compacted subgrade prep, 4,000 PSI mixes, and proper control and expansion joints, then finish with freeze-thaw-rated sealers. This combination resists the cracking, spalling, and salt damage common to Tennessee winters.
Is stamped concrete better than pavers?
Stamped concrete gives you the look of pavers or natural stone as one continuous, reinforced slab — with no joints for weeds to grow through and far less settling or washout. It typically costs less to maintain over its lifespan than unit pavers.

Still have a question?

Arthur answers the phone himself. Ask about your slab, your slope, or your finish.

Schedule a Free Design Consultation
Before you decide

Read up before you spend the money

Most of the questions homeowners ask Arthur on site are answered in writing first. Our concrete guides cover finishes, costs per square foot, sealer choice for Tennessee winters, and how to choose a concrete contractor without relying on the lowest bid.

Booking 4-8 weeks out — reserve your project date

Book your free in-person design consultation

Arthur will measure the space, check your subgrade and drainage, talk through finishes, and leave you with a firm itemized quote. Typical lead time is four to eight weeks.

  • Licensed, bonded & insured
  • Free in-person design consultation
  • Owner on-site for every pour